Hot Water Recycling and Filtration MOD. ST175

175_222 1.jpg175_222 2.jpg175_222 3.jpg175_222 4.jpg

  • This unit is designed to filter out large solids for the purpose of re-cycling the hot water for washing centrifuge machines Mod. P.
  • According to the type and scope of the sewage to be treated, the unit is fitted with drum screen separator of different slots and/or holes.
  • The unit is equipped with a pump to deliver the waste water to the unit where the water passes through the filter drum and is collected in a holding tank then when the P machine requires water it will pumped directly back to the centrifuge washer Mod P (link) automatically.
  • The drum screen is equipped with an internal scapper to remove the solids from the drum and an externa paddle to remove the fat from the standing water in the tank. The drum is also cleaned externally with a high pressure water spray to increase the performace
  • The water temperature in the tank can be maintained constant by replenishing it with fresh hot water to maintain a low delusion rate or if requested by steam.
  • Attention, the model ST175 performs only to seperate solids for the purpose of re-cycling NOT to purifier the water to a potable state.
  • The machine can 'be used to filter the liquid processing waste to be sent to the treatment plant as well.